R2Hobbies
1/8 225MM SCALE ALUMINUM POLISHED EXHAUST GENERAL PIPE WITH SPRING
Length | 220mm |
Exhaust Width | 16 - 39mm |
Engine Pipe Diameter | 19mm |
Exhaust Pipe Diameter | 8mm |
Weight | 90g (Exhaust) / 8g (Spring) |
Gross Weight | ~144g |
R2Hobbies
1/8 220MM SCALE ALUMINUM POLISHED EXHAUST GENERAL PIPE WITH SPRING
Length | 220mm |
Exhaust Width | 16 - 39mm |
Engine Pipe Diameter | 19mm |
Exhaust Pipe Diameter | 8mm |
Weight | 83.5g (Exhaust) / 8g (Spring) |
Gross Weight | ~144g |
R2Hobbies
1/8 205MM SCALE ALUMINUM POLISHED EXHAUST MEDIUM / HIGH SPEED PIPE WITH SPRING
Length | 205mm |
Exhaust Width | 16 - 38mm |
Engine Pipe Diameter | 18.5mm |
Exhaust Pipe Diameter | 7.5mm |
Weight | 89g (Exhaust) / 8g (Spring) |
Gross Weight | ~144g |
R2Hobbies
1/8 205MM SCALE ALUMINUM POLISHED EXHAUST GENERAL PIPE WITH SPRING
Length | 205mm |
Exhaust Width | 15 - 40mm |
Engine Pipe Diameter | 18mm |
Exhaust Pipe Diameter | 7.8mm |
Weight | 91g (Exhaust) / 8g (Spring) |
Gross Weight | ~144g |
HobbyKing
TURNIGY AERODRIVEXP SK-3530-1100KV / 335W
Model | SK35-30 1100 |
Resistance | 0.074ohm |
Idle Current | 0.83A |
Can size | 35mm |
Can Length | 30mm |
Shaft | 4mm |
Max Amps | 30A |
Max Watts | 250W |
Weight | 79g |
Cell count | 3S Lipoly |
Suggested Prop | 9x6" |
Magnet Type | N45SH |
Power equivalent | .25 glow engine |
Kv:1100rpm/v, Turns:20,
TURNIGY AerodriveXp SK Series AerodriveXP SK Series motors are designed ...5 Reviews
HobbyKing
29CC PISTON/PIN SET BAJA 260 AND 260S
*Note | This only fits 29CC engine |
5 Reviews
NitroTek
NB16-T NITRO RADIO CONTROLLED TRUGGY
208MM | |
108MM | |
208MM | |
297MM | |
191MM | |
11.2 | |
Toki 06 Size | |
73x39.5MM | |
19MM | |
2mm-thick hard anodized alum. | |
Four wheel shaft drive | |
38cc | |
Full set | |
Four oil filled shocks | |
Anodized aluminum | |
Steel | |
Bevel gear type | |
Metal disc brake | |
2 shoe race spec | |
Alloy manifold and tuned plastic pipe | |
Adjustable | |
Adjustable | |
Pre-painted | |
Fully built |
- ,
- ,
- 1/16 Scale mini nitro powered truggy ,
- High quality Toki engine ,
- Thick aluminium shock mounts ,
- Solid steel drive cups ,
- 2 piece racing clutch ,
- Disc brake system gives ultimate stopping power ,
- Sealed radio box protects electronics ,
- 27MHZ CE approved Radio system with changeable frequency crystals ,
- C-hub front and rear suspension ,
- Front & rear differentials ,
- Fully ball raced ,
- Metal manifold ,
- High torque mini servos ,
- Fully assembled ,
- Alum. upgrades available ,
- Front and rear anti roll bars fitted as standard ,
The NB16-T is a mini nitro radio controlled car with ...
NitroTek
NB16 NITRO RADIO CONTROLLED BUGGY
187MM | |
108MM | |
126MM | |
232MM | |
177MM | |
New Powerful Toki 05 nitro engine | |
70mm | |
18MM |
- ,
- Gear ratio: 11:1 ,
- ,
- Fully assembled ,
- Oil filled shocks ,
- Front & rear sway bar system ,
- 4WD shaft driven system ,
- Aluminium oil-filled shocks ,
- Bevel gear differentials ,
- Powerful .05 engine ,
- High torque mini servos ,
- AAA battery case for receiver ,
- 38cc fuel tank ,
- 14pcs ball bearings ,
- Hop-ups in alum coming soon ,
- 27MHZ CE approved Radio system with changeable crystals. ,
Mini nitro rc cars have been very popular since Acme ...
NitroTek
1/30TH SHERMAN M4A3 RADIO CONTROLLED TANK
22 cm | |
10 cm | |
10 cm | |
20 min's | |
4.8V with charger | |
5-10 MPH |
- ,
- Scale: 1:30 ,
- ,
- Great detail ,
- Very low price ,
- Rechargeable battery pack w/ charger ,
- Up, Down & 320 degrees turret rotation ,
- Forward, Backward, Spin, Super Spin ,
- Equipped with High Gripping Caterpillar ,
- Brilliant engine sound system ,
The M4 Sherman tank was the primary tank used by ...
NitroTek
A-4 BLUE ANGELS SKYHAWK 4CH EDF 55MM RC JET
468mm | |
680mm | |
450g | |
7dm² | |
65g/dm² | |
4Ch Tx and 6 Ch Rx | |
3 Cell Li-Po,1300 mAh,11.1V | |
1000m |
- ,
- Four 9 gram servos ,
- 55mm Ducted fan ,
- Brushless motor ,
- 30A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 55 mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Powerful batteries ,
- Approx 15min flight time ,
NitroTek
F-5E SWISS TIGER 64MM EDF 4CH RC JET - 2.4GHZ
532mm | |
939mm | |
500g | |
7dm² | |
70g/dm² | |
4Ch Tx and 6 Ch Rx , | |
1300Mah, 11.1V. | |
1000m |
- ,
- Five 9 gram servos ,
- 64MM Ducted fan ,
- Brushless motor and 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- Capable of over 90mph ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
- Approx 15min flight time ,
NitroTek
ALPHA JET CAMO 64MM 5CH RC EDF JET PLANE - 2.4GHZ
745mm | |
980mm | |
740g | |
56g/dm² | |
2.4G ( 5Ch Tx and 6 Ch Rx) | |
Powerful 2601 outer runner brushless motor | |
4 Cell Li-Po, 2200 mAh,14.8V | |
1000m |
- ,
- Seven 9 gram servos ,
- 64mm Ducted fan ,
- 30A/45A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Powerful batteries ,
- Approx 15min flight time ,
NitroTek
F 18E TIGER 64MM 4CH EDF RTF RC JET - 2.4GHZ
686mm | |
980mm | |
560g | |
10dm² | |
56g/dm² | |
4Ch Tx and 6 Ch Rx | |
Powerful 15L inner runner brushless motor and 25A ESC | |
3 Cell Li-Po Battery,1300 mAh,11.1V | |
1000m |
- ,
- Four 9 gram servos ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
NitroTek
F9F PANTHER 64MM 4CH RC EDF FIGHTER JET - 2.4GHZ
770mm | |
793mm | |
520g | |
4Ch Tx and 6 Ch Rx , | |
1300Mah, 11.1V | |
1000m |
- ,
- Four 9 gram servos ,
- 64mm Ducted fan ,
- Brushless motor and 25A ESC ,
- ,
- Pre-painted foam fuselage & wings ,
- 90% assembled ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- Capable of over 90mph ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,
- Approx 15min flight time ,
NitroTek
F 18E JOLLY ROGERS RC EDF JET 2.4G 64MM
686mm | |
980mm | |
560g | |
10dm² | |
56g/dm² | |
4Ch Tx and 6 Ch Rx | |
Powerful 15L inner runner brushless motor and 25A ESC | |
3 Cell Li-Po Battery,1300 mAh,11.1V | |
1000m |
- ,
- Four 9 gram servos ,
- ,
- Pre-painted foam fuselage & wings ,
- Pre-installed electrics ,
- CAD engineering quality ,
- Stunning paintwork ,
- 64mm electric ducted fan ,
- State of the art components ,
- 2.4G Transmitter ,
- ">Can perform amazing aerobatics ,
- Is capable of the 'Cobra Manoeuvre' ,